Whether you are building a new building or renovating an existing one, you will need to choose the best commercial roofing product. There are many options available to you, including PVC, EPDM, Modified bitumen, and Metal retrofit. Each of these commercial roofing products is effective, durable, and long-lasting.
How to Choose the Best Commercial Roofing Product
EPDM Roofing Product
Using EPDM on a commercial roof can be a smart investment. It’s durable, lightweight, and easy to install. Plus, it offers a long life.
One of the best features of EPDM is its ability to resist UV rays. This makes it great for a roof that gets a lot of sun. It’s also resistant to hail damage.
There are several different types of EPDM roofing systems. The most common is the mechanically fastened roofing system. This system uses metal screws and plates to hold the material in place.
Another common method is the ballasted roofing system. This involves installing the EPDM sheet over insulation and ballast. The ballast helps protect the material from hail, wind, and tree branches. The ballast is typically round river rock and is installed at a rate of about 1000 to 1200 pounds per square foot.
Modified bitumen Roofing Product
Amongst the various commercial roofing materials, modified bitumen is one of the best. It is durable, fire-resistant, and water resistant, and provides superior waterproofing. This low-maintenance material is a great option for flat roofs.
The most common adhesion method for modified bitumen is torch down. A propane-fueled high BTU roofing torch is used to heat the back of the membrane and adhere it to the substrate.
The membrane can also be mechanically attached. This method is the preferred method of installation for many commercial roofing companies. However, this method does not provide the same level of security as the traditional method.
In addition to being waterproof, modified bitumen also provides good protection against UV rays. This reduces the need for cooling equipment.
Modified bitumen roofing also offers great flexibility. It can be installed on slopes as shallow as a one-quarter inch per foot. Its high strength and flexibility make it ideal for areas with a lot of temperature fluctuation.
PVC Roofing Product
Roofing products made from PVC are considered to be durable and have a long life span. They are also low-maintenance and easy to install. In addition, PVC roofing membranes can help reduce energy costs. This is because they can increase the performance of roof insulation by up to 25 to 50 percent.
PVC membranes are available in various colors, including white and black. These lighter colors help to improve the reflective properties of the roof material. This helps to keep your building cooler in the summer and warmer in the winter. It also helps to reduce the urban heat island effect.
PVC is also durable and resistant to chemical damage. In addition, its high reflectivity index helps to reflect ultraviolet radiation and prevent heat loss in the winter.
TPO Roofing Product
Among all the commercial roofing materials available, TPO stands out as the best of the lot. It’s lightweight, durable, reflective, and provides several other benefits.
- TPO is a thermoplastic polyolefin membrane that’s made from ethylene-propylene rubber. It’s also reinforced with fabric scrim to provide stability.
- TPO roofing systems are durable, easy to install, and 100% recyclable. It also provides better insulation, which can lower your HVAC costs.
- It also provides better protection against ultraviolet damage. TPO is more resistant to corrosion and disintegration than other roofing materials. Unlike PVC, TPO is a non-toxic material.
- TPO roofs are also more resistant to mold and bacteria growth. This makes them easier to maintain. In fact, many TPO roofing products come with 30-35 year warranties.
- Thermoplastic polyolefin roofing is also very flexible. This makes it easy to apply over a variety of pre-existing roof materials.
Metal retrofit Roofing Product
Whether you’re looking to retrofit or replace your commercial roofing, metal retrofit commercial roofing is an excellent solution for you. Not only will it save you money, but it can also make your building safer.
The installation process is fast and simple. The roof retrofit project doesn’t require the removal of the existing roof, saving you time and money. Instead, the crew walks on the roof to prepare it for the new metal roof.
The new metal roof is installed over the existing roof, and then the crew installs another layer of insulation between the old and new roof. This second layer adds to the R-value and helps ensure a flat and even surface.
Retrofit roofing is also an excellent way to repair a metal roof that’s showing signs of age. Metal roofs rust and deteriorate over time due to exposure to the elements. A metal retrofit can repair the roof, adding an extra layer of protection, and reducing the cost of a full roof replacement.
About Gordy Roofing Company
Gordy Roofing Company has been the trusted source in East Texas for over 50 years and across the area. We are a family-owned business started by our dad over 5 decades ago, and we are 3 brothers that have continued our family tradition and skill set taught to us by our father. We bring this commitment to you and our passion for turning your home into a work of art. We are insured, licensed, and bonded and have become the leading expert in our market segment. We desire for you to become part of our roofing family and our history. We have locations in the following areas: Big Sandy Texas | Tyler Texas | Longview Texas | Mineola Texas | Gilmer Texas |
